US
UNIVERSAL
Dyn uni
Dyn uni
P48
$ 543
Dyn uni
passiv
$ 543

made_in_switzerland_low_2.jpg

SCHERTLER’s DYN P48 series contact microphones are high-end transducers designed for professional applications. Suitable for use on a variety of instruments in both live/amplified and studio environments, these fully-balanced, active, dynamic contact microphones can be safely applied to even the most valuable of instruments using the special adhesive putty provided. The microphones can be quickly transferred between instruments during performances or recording sessions. Once in place, their lightweight design makes them unobtrusive to the performer.

A balanced XLR connector enables direct connection to a microphone input on a mixing console, or a full range amplification system. (Note: these contact microphones require 22-48V phantom power, with the exception of the passive DYN UNI.) The torsion-resistant, Kevlar-reinforced cable is designed to withstand the rigors of daily use while delivering best possible performance results.

SCHERTLER DYN P48 series microphones all feature built-in Class-A preamps and advanced filtering technology that enables each microphone to capture the best tonal qualities of the intended instrument.

The DYN UNI P48 has a linearized frequency response enabling it to be successfully used with a range of different instruments. Includes padded bag and special adhesive putty.

made_in_switzerland_low_2.jpg

The DYN UNI is a fully balanced, passive dynamic contact microphone that is suitable for use on a variety of instruments. It does not include an active preamp and therefore requires no phantom power. The microphone can be safely applied to even the most valuable of instruments using the special adhesive putty provided. It can also be quickly transferred between instruments during performances or recording sessions. Once in place, the microphone’s lightweight design makes it unobtrusive to the performer.

The DYN UNI’s balanced XLR connector enables direct connection to a microphone input on a mixing console, or a full range amplification system. The torsion-resistant, Kevlar-reinforced cable is designed to withstand the rigors of daily use while delivering best possible performance results. This microphone features passive filtering technology, enabling it to be successfully used with a range of different instruments.

Transducer type
Electro-dynamic moving coil active contact microphone
Mechanical decoupling
Butterworth 2nd order, Q = 0.6
Frequency Response (@ ±3dB) - filtered *
20 to 16 kHz
Sensitivity
ca. -30 dBu
Dynamic range
139 dB
Output impedance (@ 1 kHz)
280 Ω
Operating voltage
22 - 48 VDC
Built in preamp
Yes all Class-A
External preamp
No
Contacts
All hard gold plated 0.5 mm
For fixed installations
No
Removable
Yes
Connection
XLR balanced
Cable Length
4 m
Note *
Output frequency response is filtered electronically to better match the specific application.
Transducer type
Electro-dynamic moving coil contact microphone
Mechanical decoupling
Butterworth 2nd order, Q = 0.6
Frequency Response (@ ±3dB) - filtered *
40 to 14 kHz
Sensitivity
ca. -38 dBu
Dynamic range
139 dB
Output impedance (@ 1 kHz)
380 Ω
Operating voltage
No (passive)
Built in preamp
No (passive)
External preamp
No
Contacts
All hard gold plated 0.5 mm
For fixed installations
No
Removable
Yes
Connection
XLR balanced
Cable Length
4 m
Note *
Output frequency response is filtered electronically to better match the specific application.
-
$ 18
1 m
$ 76
2 m
$ 88
4 m
$ 98
Schertler SA
ADDRESS:
via Beroldingen 18
6850 Mendrisio
Switzerland

VAT number:
CHE-104.762.948 IVA
 
  info@schertler.swiss 
  +41 91 630 0710
  +41 91 630 0711
SUPPORT AND REPAIRS
Open a Ticket : Schertler Support

  +41 91 630 0710
  +41 91 630 0711
: FAQ-Generic Pt.8
 
Company

    For a better experience you need to enable cookies


    this window will close in 0 seconds