DYN-V
Ideal for orchestra and pro-audio/broadcast
solutions
Easily moved from instrument to instrumenT.
Neutral tone
Accurate sound reproduction
NO piezo harshness or distortion
The Schertler DYN-V for violin and viola is the most
natural acoustic transducer on the market. For orchestral
amplification in a moderately loud environment, this
electrodynamic microphone is the sound engineer’s
first choice. DYN-V is an accurate, natural-sounding
transducer for the violinist seeking to amplify the
true sound of the instrument.
Balanced, low impedance output through an XLR connector
means DYN-V connects directly into a microphone input
of the studio or stage mixer.
The application and use of Schertler DYN-Series transducers
is extremely simple and safe. Special inert adhesive
putty is provided to mount the pickup to the instrument
body. The best location for your sound is quickly found
through our indications or through experimentation with
placement.
As with other Schertler electrostatic and electrodynamic
transducers, DYN-V works best through a full-range amplification
system such as the Schertler PRE-A-II
preamplifier and, for example, the Schertler PUB
280 active loudspeaker.
| MECHANICAL DECOUPLING |
Butterworth 2nd
order, Q=0.6 |
| NOMINAL IMPEDANCE |
1500ohm / 1000Hz |
| FREQUENCY RESPONSE |
60Hz to 18 KHz +/- 3dBu |
| DYNAMIC RANGE |
139dB, 145dB Typical |
| EQUIVALENT OUTPUT NOISE |
16dB/0dB=0.002% |
| SENSITIVITY |
20mV/g |
| SENS. ON INSTRUMENT |
ca. -32dBu |
| TEMPERATURE RANGE |
-20°C to +70°C |
| CONTACTS |
all hard gold 0.5um plated |
| CONNECTION |
XLR, Balanced (2.2m) |
| 0dBu <=> 0.775V |
|