Products > Pickups > for Mandolin > Dyn-M
 
MANDOLIN PICKUPS
see also: BASIK
 

DYN-M

The Mandolin. An instrument to get passionate about. More and more musicians are finding the mandolin can be integrated into a variety of musical styles and, when correctly amplified, even take center stage.
The Schertler DYN-M makes amplifying the mandolin very easy by providing a pickup that not only reproduces the sophisticated mid/high sounds of the instrument but does so with high feedback resistance and ease of use.
Balanced, low impedance output through an XLR connector means DYN-M connects directly into an acoustic guitar amp or a microphone input of the studio or stage mixer.
The application and use of Schertler DYN-Series transducers is extremely simple and safe. Special inert adhesive putty is provided to mount the pickup to the instrument body. The best location for your sound is quickly found through our indications or through experimentation with placement.
As with other Schertler electrostatic and electrodynamic transducers, DYN-M works best through a full-range amplification system such as the Schertler PRE-A II preamplifier and Schertler combo amplifiers or active loudspeakers.

The DYN-M is also recommended for SITAR players.

MECHANICAL DECOUPLING Butterworth 2nd order, Q=0.6
NOMINAL IMPEDANCE 1500ohm / 1000Hz
FREQUENCY RESPONSE 60Hz to 18 KHz +/- 3dBu
DYNAMIC RANGE 139dB, 145dB Typical
EQUIVALENT OUTPUT NOISE 16dB/0dB=0.002%
SENSITIVITY 20mV/g
SENS. ON INSTRUMENT ca. -30dBu
TEMPERATURE RANGE -20°C to +70°C
CONTACTS all hard gold 0.5um plated
CONNECTION XLR, Balanced (2,2m)
0dBu <=> 0.775V
 
 
"I’VE ALWAYS WANTED A PICKUP THAT COULD REPRODUCE MY MANDOLIN’S TONE ACCURATELY. THE DYN-M AND PREAMMP COMBO IS THE BEST ‘VE EVER HEARD"

CHRIS THILE