Products > Pickups > Guitar Pickups > Dyn-G
 
GUITAR PICKUPS
see also Bluestick: STANDARD | ACTIVE EQ | CLASSIC | ON BOARD | MARINE | MARINE POCKET | BASIK | DUAL
 

DYN G

The acoustic guitar - heard in every type of music imaginable. Now "reproduced," not "recreated." The Schertler DYN-G for nylon and steel string guitar (but also recommended for banjo) is the most natural acoustic transducer on the market. For solo or orchestral amplification in a moderately loud environment, this electrodynamic microphone is the sound engineer's first choice. Easily moved from guitar to guitar, from session to session, DYN-G is an accurate, natural-sounding transducer for the guitarist seeking to amplify the true sound of the instrument. Balanced, low impedance output through an XLR connector means DYN-G connects directly into an acoustic guitar amp, for example our UNICO or DAVID, or a microphone input of the studio or stage mixer. The application and use of Schertler DYN-Series transducers is extremely simple and safe. Special inert adhesive putty is provided to mount the pickup to the instrument body. The best location for your sound is quickly found through our indications or through experimentation with placement.

MECHANICAL DECOUPLING Butterworth 2nd order, Q=0.6
NOMINAL IMPEDANCE 1500ohm / 1000Hz
FREQUENCY RESPONSE 60Hz to 18 KHz +/- 3dBu
DYNAMIC RANGE 139dB, 145dB Typical
EQUIVALENT OUTPUT NOISE 16dB/0dB=0.002%
SENSITIVITY 20mV/g
SENS. ON INSTRUMENT ca. -30dBu
TEMPERATURE RANGE -20°C to +70°C
CONTACTS all hard gold 0.5um plated
CONNECTION XLR, Balanced (1,8m)
0dBu <=> 0.775V
 
       
 
  " ….WITH THE SCHERTLER DYN-G I FINALLY HAVE A WARM AND NATURAL ACOUSTIC SOUND. THE DYN-G WORKS GREAT ON BIG FESTIVAL STAGES WHERE I NEED TO PLAY LOUD AND AVOID FEEDBACK AND DISTORTION PROBLEMS.…"

BEPPE GAMBETTA