|
DYN-B-SET
Ideal for orchestra and pro-audio/broadcast solutions.
Easily moved from instrument to instrument.
Natural tone
Accurate sound reproduction
No piezo harshness or ditortion
Perfect amplification of the acoustic double bass has
been a long-time dream for most jazz bassists. The DYN-B,
in combination with our PRE-A-II
and PUB 280
and 380
series is simply the most natural double bass transducer
in the world, one step closer to that dream.
The application and use of the Schertler DYN-B transducer
is extremely simple and safe. Special inert adhesive
putty is provided to mount the pickup to the instrument
body. The best location for your sound is quickly found
through our indications or through experimentation with
placement.
The balanced, low impedance output reduces the risk
of hum and radio frequency (RF) interference, even with
long cable runs. The XLR connector allows direct connection
to mixing desks or preamplifier inputs. For additional
control of level and tone, the Schertler PRE-A-II
preamplifier is perfectly matched to the DYN-Series.
| MECHANICAL DECOUPLING |
Butterworth 2nd
order, Q=0.6 |
| NOMINAL IMPEDANCE |
1500ohm / 1000Hz |
| FREQUENCY RESPONSE |
20Hz to 18 KHz +/- 3dBu |
| DYNAMIC RANGE |
139dB, 145dB Typical |
| EQUIVALENT OUTPUT NOISE |
16dB/0dB=0.002% |
| SENSITIVITY |
20mV/g |
| SENS. ON INSTRUMENT |
ca. -30dBu |
| TEMPERATURE RANGE |
-20°C to +70°C |
| CONTACTS |
all hard gold 0.5um plated |
| CONNECTION |
XLR, Balanced (0.24m) |
| 0dBu <=> 0.775V |
|
