5.2.1. DAVID has 80W RMS power, bi-amplified (50 watts into the 6” woofer, 30 watts into the 1” dome tweeter).

5.2.2. Two channels, and one Insert jack that can be used as direct line connection to the master.

5.2.3. Cm 30x34x24.5 (11.75" x 13" x 9.5") and it’s weight is 9Kg (22 pounds).

5.2.4. Yes. For optimum bass reproduction, a bass extension box (subwoofer) like Schertler BASS 200 or the PUB 380 must be used. For bass application, Schertler has included a low-cut switch (150 Hz) to protect the 6” speaker and a line out to connect an active subwoofer. This creates a 3-way (tri-amplified) Bass amplifier.

5.2.5. Yes. The only thing to do is to change the position of the switch situated on the rear panel from 115V to 230V or reverse, and than change the fuse that is above the power input. For (USA) 115V use the 6.3A fuse, for (EU) 230V use the 3.15A fuse.

5.2.6. Yes, with the SCHERTLER volume pedal (UNI-PED); simply connect the pedal to the Insert jack on amplifier.

5.2.7. All the details are in the “General Catalogue” catalogue.